Serving the Anaheim area  ·  (714) 422-0673  ·  Open Mon-Sun 7am-7pm
📞 (714) 422-0673 Free Quote

Metal Roofing in Yorba Linda, CA (92886) · Local Professionals

Anaheim Metal Roofing · Fast response in Yorba Linda and the Anaheim area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+343Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Yorba Linda is a city of hillside custom homes and horse properties, where large lots climb toward the Santa Ana Mountains and the wind never seems to stop. Many of the houses along Imperial Highway and around the Yorba Linda Country Club were built between the 1970s and 2000s, with shake, tile, or composition roofs that have taken decades of sun and Santa Ana winds. If you live in 92886, you already know that ember season is real and that a loose ridge cap can turn into a leak fast.

That is why homeowners here call Anaheim Metal Roofing. We are based in Anaheim, just down the 91, and we have spent years working on roofs from the flat lots near Travis Ranch to the steep driveways off Fairmont Boulevard. Our crews know how to handle the wind uplift, the dry brush, and the tight access that come with Yorba Linda properties.

Metal Roofing in Yorba Linda (92886)

Yorba Linda is not a flat grid of tract homes. The city rises from the valley floor into the foothills, and that means grade, drainage, and access change from street to street. On the horse properties near the Santa Ana Riverbed, you have long, low barns and ranch houses with wide eaves and exposed fasteners that work loose in the wind. Up in the hills, custom homes sit on slopes with narrow driveways and mature oak trees that drop limbs and debris. The soil is often clay and rock, so water runs fast and finds any gap in flashing. We see a lot of failed fasteners, separated seams, and wind-lifted panels after a fall wind event, plus the occasional puncture from a fallen limb. Our team is set up for both the flat, open lots and the steep, tight ones, and we bring the right equipment for each.

We have been serving Yorba Linda and the surrounding Anaheim area for years, and we understand the local building department, the inspection timing, and the HOA design review that some neighborhoods require. Whether you need a full standing seam install or a repair after a storm, we know what to expect here.

Our services in Yorba Linda

How a Job Works in Yorba Linda

Step 1: You call us at (714) 422-0673 or send a message, and we schedule a free on-site assessment. We walk the roof, check the flashing, fasteners, and seams, and look at how the roof meets your walls and gutters. We also note access, slope, and any HOA or permit issues. You get a written estimate with options, not a pressure pitch.

Step 2: Once you approve, we pull the permit if needed and coordinate with your HOA if the neighborhood requires design review. On hillside properties, we plan for narrow driveways and use compact equipment or manual hauling to avoid damage. We protect your landscaping and set up a staging area that works for your lot. The crew installs the new metal roof or completes the repair, and we keep you posted on progress and any surprises.

Step 3: When the work is done, we clean up thoroughly. We magnet-sweep for nails, haul away old materials, and do a final walkthrough with you to make sure you are satisfied. We leave your property clean and your roof ready for the next wind season.

Pricing in Yorba Linda depends on the size and complexity of your roof, the material you choose, access, and the condition of the existing roof. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are going over existing shingles, retrofit starts at $7 per square foot. Repairs start at $450, and screw replacement or re-fastening starts at $750. Flashing, chimney, and skylight repair starts at $600, and gutters for metal roofs start at $9 per linear foot. For a free estimate tailored to your property, call us at (714) 422-0673.

My house is on a slope in the hills above Yorba Linda, and the wind seems to rip at the roof edges. What metal roof system works best for that?
On exposed hillside lots, we usually recommend standing seam with concealed fasteners and heavier gauge panels. The concealed clips allow for thermal movement and hold up better against uplift. We also check the eave and ridge details and may add wind clips or a continuous cleat. For horse properties with open barns, we often use corrugated or ribbed panels with exposed fasteners, but we spec screws with washers and check them after wind events.
A storm just knocked a limb onto my roof near the Yorba Linda Country Club. Can you handle emergency repairs?
Yes. We offer storm and wind damage repair, and we can inspect for free. Call (714) 422-0673 and we will schedule a prompt visit. We can tarp or secure the area if needed and give you a written estimate for the repair. We document the damage for insurance if you are filing a claim.
What does a typical metal roof replacement cost for a 2,000 square foot house in 92886?
For a standard 2,000 square foot ranch or two-story, a metal roof replacement often falls in the range of $18,000 to $30,000 depending on material and complexity. Standing seam runs higher, while corrugated panel is lower. Access, slope, and whether we remove the old roof all affect the price. We give you a firm number after a free inspection.
Do I need a permit to replace my roof in Yorba Linda, and how long does it take?
Yes, a roofing permit is commonly required for a full replacement or re-roof. The City of Yorba Linda Building Department handles permits, and requirements vary by scope. We pull the permit for you and schedule inspections. Typical turnaround is a few days to a couple of weeks depending on the city's workload. We always defer to the local building department for final rules.
My HOA requires approval for roof color and style. Can you help with that process?
We can. Many HOAs in Yorba Linda have design review, and we can provide product samples, color chips, and specification sheets for your application. We will coordinate with your HOA point of contact and make sure the panel profile and color meet the guidelines. If there is a property line issue with a neighbor, we follow local setback rules and can show you the survey markings before we start.
Are you insured for work on my Yorba Linda property?
Yes. We are fully insured with general liability and workers' compensation coverage. Our crews are trained and covered, so you are protected if anything happens on the job.
What maintenance should I do on a metal roof in Yorba Linda to prevent leaks?
Check fasteners and seams after the fall wind season, and clear debris from valleys and gutters, especially if you have oak trees. Look for loose or lifted panels and any flashing gaps around chimneys and skylights. A yearly inspection can catch small issues before they become leaks. We offer free estimates for inspections and can set up a maintenance plan.
Why choose us?

Trusted professionals in Anaheim

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Anaheim

All your work handled by qualified professionals in Anaheim

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

343+ Verified Client Reviews in Anaheim

⭐⭐⭐⭐⭐ 4.9/5 · 343 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Anaheim · Response within 24h · No commitment · ☎ (714) 422-0673

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Anaheim ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm