Serving the Anaheim area  ·  (714) 422-0673  ·  Open Mon-Sun 7am-7pm
📞 (714) 422-0673 Free Quote

Metal Roofing in Westminster, CA (92683) · Local Professionals

Anaheim Metal Roofing · Fast response in Westminster and the Anaheim area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+343Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Westminster is a city of single-story stucco ranches, and most of them still wear the original thin composition shingles that went up in the 1950s and 60s. Drive through the neighborhoods off Bolsa Avenue or around Westminster High School and you can see it: sun-baked shingle that has curled, cracked, and started shedding granules into the gutters.

That is exactly the kind of roof our team works on every week. Anaheim Metal Roofing is based in Anaheim and serves Westminster (92683) and the surrounding area, handling metal roof replacement and metal roof over shingles (retrofit) for homeowners who are tired of patching the same leaks. We are fully insured, and we know the housing stock here: low-pitch roofs, tight side yards, and the occasional HOA that wants to approve the panel color before anything gets ordered.

Metal Roofing in Westminster (92683)

Westminster sits on flat ground in the coastal basin, so you do not get the slope and drainage issues you find in the hills. What you do get is relentless sun and UV that bakes shingle until it cracks, plus gusty Santa Ana winds in fall and winter that lift edges and ridges. The typical Westminster ranch has a low-pitched roof with wide eaves and a thin layer of old shingle, sometimes two. When we do a metal roof over shingles retrofit, we check the existing layers first because code limits how many you can recover over. If the deck is soft or the old shingle is too far gone, we recommend a full tear-off and replacement instead. Tight side yards are common here, so we plan panel staging and dumpster placement before the crew shows up, not the morning of.

Our team has worked on homes throughout Westminster and the Anaheim area, from the tracts near Sigler Park to the older blocks off Beach Boulevard. We handle standing seam, corrugated and ribbed panels, stone-coated steel, and metal shingle, and we can match a profile that fits the look of your street.

Our services in Westminster

How a Job Works in Westminster

Step 1: call us at (714) 422-0673 and we set up a free on-site assessment. We walk the roof, check the deck and flashing, measure the pitch, and talk through whether a retrofit over your existing shingles makes sense or if a full replacement is the better call. You get a written estimate with the scope spelled out.

Step 2: once you approve, we pull the permit through the local building department and schedule the crew. In Westminster that often means coordinating with an HOA on panel profile and color, and planning for narrow side-yard access so we are not blocking your neighbor's driveway. We keep the job site organized and protect your landscaping.

Step 3: when the work is done, we clean up completely, haul away old material and fasteners, and walk the roof with you. We do not leave until you have seen the finished job and know what to expect going forward.

Pricing in Westminster depends on the size and pitch of your roof, how many layers of old shingle are up there, and whether we are doing a retrofit or a full tear-off. As a ballpark, metal roof installation starts at $8 per square foot, standing seam starts at $10 per square foot, metal roof replacement starts at $9 per square foot, and a metal roof over shingles retrofit starts at $7 per square foot. Repairs and leak calls start at $450, and screw replacement or re-fastening starts at $750. Corrugated and ribbed panel roofing starts at $5.50 per square foot, and stone-coated steel or metal shingle starts at $9 per square foot. Every roof is different, so call (714) 422-0673 for a free estimate and a real number for your property.

My Westminster ranch has the original 1960s shingle and a low pitch. Can you go over it with metal, or do I need a tear-off?
It depends on how many layers are already there and what shape the deck is in. Code limits how many existing layers you can recover over, so we check that first. If the shingle is brittle and the deck is soft, a tear-off is the safer call. We will tell you straight at the free inspection.
A Santa Ana wind storm peeled back some panels on my roof near Beach Boulevard. How fast can you get out?
Call (714) 422-0673 and we will schedule an inspection as soon as possible. We handle storm and wind damage repair, and we can tarp or secure an active leak while we wait on materials. We document the damage for your insurance claim, though coverage decisions are up to your carrier.
What does a typical metal roof cost for a single-story Westminster home?
For a standard single-story ranch, most homeowners are looking at the per-square-foot ranges we list, with retrofit starting around $7 per square foot and full replacement around $9 per square foot. The final number depends on roof size, access, and condition. We give you a written estimate before any work starts.
Do I need a permit for a metal roof in Westminster, and does the city have design rules?
A full replacement or re-roof typically requires a permit, and the thresholds and inspection requirements are set by the local building department. We pull the permit and coordinate the inspection. If your home is in an area with design review or an HOA, we help you get the panel profile and color approved before ordering.
My HOA wants to approve the metal roof color, and my neighbor says the panels will hang over the property line. How do you handle that?
We work with HOA architectural review regularly and can provide color samples and spec sheets for the approval packet. On property lines, we keep the installation within your legal boundary and follow setback rules. If there is a question, we recommend confirming your lot lines before we order material.
Is your crew covered by insurance if someone gets hurt on my Westminster property?
Yes. We are fully insured with general liability and workers' compensation coverage.
What should I do to keep a metal roof in good shape between storms in Westminster?
Have the roof inspected once a year, especially after the fall wind season. We check fasteners, seams, and flashing, because that is where leaks start. Keeping gutters clear and touching up any scratched coating also helps. A quick inspection now can save a repair bill later.
Why choose us?

Trusted professionals in Anaheim

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Anaheim

All your work handled by qualified professionals in Anaheim

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

343+ Verified Client Reviews in Anaheim

⭐⭐⭐⭐⭐ 4.9/5 · 343 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Anaheim · Response within 24h · No commitment · ☎ (714) 422-0673

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Anaheim ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm