Licensed & Insured, in Anaheim and surrounding areas. Metal Roof Installation · Standing Seam Metal Roofing · Metal Roof Replacement.
Your Free Quote Request
All your work handled by qualified professionals in Anaheim
Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.
Included in your service
Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.
Included in your service
Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.
Included in your service
Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.
Included in your service
Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.
Included in your service
Priority leak response: we trace the leak to its real source instead of caulking the symptom.
Included in your service
The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.
Included in your service
Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.
Included in your service
The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.
Included in your service
Steel strength under a textured stone finish, with strong hail and wind performance.
Included in your service
Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.
Included in your service
Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.
Included in your service
Flashing is the number one leak point on any metal roof, and it is what we fabricate best.
Included in your service
Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.
Included in your service
Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.
Included in your service
A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.
Included in your service
Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.
Included in your service
Barns, workshops, churches, and light commercial metal roofing across the county.
Included in your service
Reach us by phone at (714) 422-0673 or fill out the estimate form. We get back to you within 24 hours, no commitment required.
Our Metal Roofing Contractor visits your property, evaluates the project, and provides a written quote before any work begins.
Our crew completes the metal roofing and leaves your property clean and tidy. Full cleanup is included.
Continuous training, professional equipment, meticulous and code-compliant work
Full coverage on all our job sites, no exceptions
Emergencies, weekends, holidays: available when you need us
Response within 24h, no commitment, by phone or form
Available Mon-Sun 7am-7pm
We serve in Anaheim and surrounding areas · On-site visits included · Free estimate within 24h
Anaheim Metal Roofing is a team of local certified professionals based in Anaheim. We respond quickly in Anaheim and surrounding areas with professional equipment suited to every job.
Free estimate, transparent pricing, no subcontracting. Tell us about your roof. We'll handle the rest.
📞 Call (714) 422-0673⭐⭐⭐⭐⭐ 4.9/5 · 343 verified Google reviews
“We needed a metal roof on our equipment hangar out in the rural part of the county and these guys handled the whole thing. The crew of four knocked out the corrugated panels in about three days and cleaned up every last screw and scrap piece before they left. Way sturdier than the old setup we had.”
Commercial Metal Roofing
“Had them do a metal roof over our existing shingles on the back porch and patio cover area. I was worried about the transition but they flashed it perfectly and it's bone dry through the last few storms.”
Metal Roof Over Shingles (Retrofit)
“Called them out because I was worried about debris piling up around our metal building. They did a full inspection of the panels and fasteners, cleared the problem areas, and gave me an honest report instead of trying to upsell me a whole replacement. Appreciated the straight talk.”
Metal Roof Inspection
“Our old metal roof on the house was rusting through in spots and they tore it off and replaced it with a new standing seam system. Two weeks start to finish, and the difference is night and day. Only reason it's not five stars is they left a small pile of old fasteners in the side yard the first day, but they cleaned it up once I mentioned it.”
Metal Roof Replacement
“Our skylight started leaking right where it meets the metal roof and these folks tracked it down fast. They redid the flashing and sealed it up, and the drip that had been staining our ceiling for months is completely gone. Relieved is an understatement.”
Skylight Repair
“We went with standing seam on our house and the install crew was seriously impressive, six guys, super organized, and the panels line up perfectly across the whole roof. They finished ahead of schedule and the curb appeal is unreal. Neighbors keep asking who did it.”
Standing Seam Metal Roofing
“Straightforward metal roof install on our place and they nailed it. Fair price, showed up when they said they would, and the corrugated panels look great.”
Metal Roof Installation
“We wanted the look of tile without the weight and cracking, so they set us up with stone-coated steel. Honestly it's hard to tell it's not real tile from the street, and the crew was careful with our landscaping the whole time. Took about a week and a half for the whole house. Would use them again in a heartbeat.”
Stone-Coated Steel RoofingReal photos of our work in Anaheim · Each image shows the final result achieved for our clients
Indicative estimates: your free personalized quote is always exact
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Exposed fastener panel roof | Starting at $8/sq ft | Includes tear-off, high-temp underlayment and corrugated or ribbed panels; pitch and deck condition move the price |
| Standing seam metal roof | Starting at $14/sq ft | Concealed fasteners and formed seams; roof complexity and panel width drive the final figure |
| Stone-coated steel or metal shingle | Starting at $12/sq ft | Tile and shake profiles for HOA or historic-district homes; design review may add scheduling time |
| Retrofit over existing shingles | On estimate | Cost depends on existing layer count allowed by code and deck condition under the old roof |
| Travel | Included | in Anaheim and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Standing seam installation, standard pitch | Starting at $10/sq ft | Includes panels, clips, underlayment, and standard flashing; tear-off and deck repair add cost |
| Standing seam on low-slope or complex roof | Starting at $13/sq ft | Covers valleys, hips, and penetrations; pitch and layout complexity drive the increase |
| Retrofit over existing shingles | On estimate | Needs an on-site look to confirm deck condition and code limits on existing layers |
| Travel | Included | In Anaheim and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Full tear-off and metal replacement, standard pitch | Starting at $9/sq ft | Includes tear-off, haul-away, deck inspection and new panels; number of existing layers moves the price. |
| Tear-off with decking repair | Starting at $12/sq ft | Includes sheathing replacement where soft or delaminated; extent of hidden damage drives the final number. |
| Standing seam or specialty profile replacement | Starting at $14/sq ft | Includes concealed-fastener panels and formed flashing; roof complexity and panel profile move the price. |
| Complex or large-scale job | On estimate | Steep hillside roofs, multiple levels and heavy flashing work need an on-site look before a number. |
| Travel | Included | In Anaheim and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Retrofit over existing shingles, simple gable | Starting at $7/sq ft | Includes deck inspection, slip sheet, panels and finish work on a single-story ranch tract. |
| Retrofit with complex roof layout | Starting at $9/sq ft | Adds hips, valleys and multiple penetrations that require detailed flashing and slower staging. |
| Premium profile retrofit (standing seam, stone-coated) | Starting at $11/sq ft | Higher material cost and concealed fasteners or textured panels, priced after profile selection. |
| Tear-off and deck repair add-on | On estimate | Needed when the deck is soft or layer count exceeds code, so we inspect before quoting. |
| Travel | Included | in Anaheim and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Minor repair (reseal, pipe boot, small re-fastening) | Starting at $450 | Includes one trip, standard sealant, and small parts; access and roof height move the price. |
| Single panel replacement | Starting at $750 | Includes matching panel, fasteners, and labor; panel profile and color match drive cost. |
| Flashing rebuild (chimney, skylight, wall) | Starting at $950 | Includes new flashing materials and sealing; detail complexity and access raise the total. |
| Larger reseal or multi-panel repair | On estimate | Needs an on-site look because panel count, rust, and access vary widely by roof. |
| Travel | Included | In Anaheim and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single-point leak repair | Starting at $450 | Includes diagnostic inspection, one repair zone (fasteners, boot, or flashing), and verification water test. |
| Multi-zone or seam repair | Starting at $750 | Covers two or more leak sources or standing seam resealing, with access and pitch affecting the final price. |
| Emergency tarping and stabilization | Starting at $550 | Temporary weatherproofing after storm or wind damage, priced by roof size and access difficulty. |
| Complex or large-scale repair | On estimate | Widespread fastener failure or saturated decking needs an on-site look before we quote a number. |
| Travel | Included | In Anaheim and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Spot screw reset (small roof or isolated loose fasteners) | Starting at $750 | Includes roof walk, pull and replace loose or rusted screws, and new UV-resistant washers on the affected runs |
| Full roof re-fastening (typical single-family home) | Starting at $1,200 | Systematic reset of every fastener with oversized screws where needed, torqued to panel spec, plus photo record |
| Steep or hillside re-fastening (Anaheim Hills, Canyon Rim) | On estimate | Steep pitch and limited ladder access add rigging and labor time, so we price after an on-site roof walk |
| Re-fastening plus lap sealing or coating | On estimate | Combines fastener reset with sealant at laps and penetrations, or a full coating, priced after inspection |
| Travel | Included | in Anaheim and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Corrugated panel roof, patio cover or shed | Starting at $5.50/sq ft | Includes panels, underlayment and fasteners; gauge and finish move the price |
| R-panel roof, garage or workshop | Starting at $6.50/sq ft | Includes ribbed panels and closures; roof height and access raise labor |
| Panel-over retrofit where code allows | Starting at $6.00/sq ft | Includes panels over sound deck; layer limits and flashing condition decide fit |
| Repair and screw re-fastening | On estimate | Scope depends on how many fasteners failed and flashing condition |
| Travel | Included | in Anaheim and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Metal shingle roof replacement, single-story ranch | Starting at $9/sq ft | Includes tear-off, underlayment, flashing and standard profile; pitch and access move the price |
| Metal shingle roof, two-story or complex roof | Starting at $12/sq ft | Covers steep pitch, multiple valleys and skylights; number of penetrations drives the rate |
| Retrofit over existing shingles | On estimate | Requires a code check on existing layers and deck condition before we quote a number |
| Deck repair or sheathing replacement | On estimate | Priced per sheet after inspection; dry rot on 1950s homes is common and must be seen |
| Travel | Included | in Anaheim and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Stone-coated steel tile or shake, standard profile | From $9/sq ft | Includes underlayment, panels, and standard flashing on an accessible single-story roof. |
| Two-story or cut-up roof with valleys and skylights | From $12/sq ft | Adds labor for complex flashing, staging, and safety on steeper Anaheim Hills roofs. |
| Tear-off and deck repair | On estimate | Priced after we inspect the existing layers and sheathing condition on site. |
| Hillside access or tight-lot staging | On estimate | Canyon Rim and Platinum Triangle jobs may need extra handling and material staging time. |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book the job. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Copper accents and flashing | Starting at $20/sq ft | Porch roofs, bay window caps and chimney flashing, priced by the piece and metal weight. |
| Full copper standing seam roof | Starting at $28/sq ft | Hand-formed 16 to 20 oz copper panels with soldered seams, underlayment and full flashing. |
| Zinc and aluminum architectural panels | Starting at $22/sq ft | Flat-lock and standing seam profiles for modern facades and mixed-use buildings. |
| Custom fabrication and restoration | On estimate | Shop-formed caps, crickets and trim matched to original profiles need an on-site measure first. |
| Travel | Included | In Anaheim and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Reflective coating on sound panels | Starting at $2.50/sq ft | Includes wash, prep, and one reflective topcoat; rust treatment adds to the rate. |
| Rust treatment and primer system | Starting at $3.25/sq ft | Adds converter and primer over rusted areas plus fastener replacement before coating. |
| High-build elastomeric coating | Starting at $4.00/sq ft | Thicker film for older corrugated roofs; panel count and pitch drive the final number. |
| Spot repair and recoat | On estimate | Isolated rust or failed zones need an on-site look to scope the repair area. |
| Travel | Included | in Anaheim and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Single penetration flashing repair | Starting at $600 | Covers one chimney, skylight, or valley with standard access and painted steel flashing. |
| Multi-penetration flashing package | Starting at $1,200 | Two to three penetrations on one roof, priced together to save on staging and travel. |
| Custom copper fabrication | On estimate | Shop-bent copper for historic or custom homes, quoted after measuring the actual profile. |
| Storm emergency stabilization | Starting at $450 | Tarp and temporary seal during active rain, credited toward the permanent repair. |
| Travel | Included | In Anaheim and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Clip and fastener upgrade (single section) | Starting at $1,200 | Re-spacing clips and fasteners to the panel maker's wind spec on one roof section. |
| Edge trim replacement and sealing | Starting at $1,450 | Replacing deformed rake and eave trim, sealing behind it, re-securing drip edge. |
| Ridge and end cap re-fastening | Starting at $1,300 | Re-securing ridge and end caps with correct fasteners and washers after wind lift. |
| Full wind-uplift retrofit | On estimate | Systematic re-fastening across eave, rake, ridge and panel field on larger exposed roofs. |
| Travel | Included | In Anaheim and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Free storm damage inspection | Free | Full roof and attic check with photo documentation, no obligation to book the repair. |
| Minor re-fastening and resealing | Starting at $450 | Replace backed-out screws, reseal washers and seams, reset lifted panel edges on accessible roofs. |
| Panel replacement and flashing repair | Starting at $1,200 | Replace damaged panels and rebuild failed flashing; price moves with panel type and roof access. |
| Ember and scorch assessment | On estimate | Hillside and canyon properties need an on-site look to assess heat damage and document for insurance. |
| Travel | Included | In Anaheim and surrounding areas, no separate call-out or mileage fee. |
| Estimate | Free | Response within 24 hours at (714) 422-0673, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Basic visual inspection | Free estimate | Ground and roof-level visual check with photo documentation, priced by roof size and number of levels |
| Fastener and seam audit | Starting at $250 | Hands-on check of every screw, washer, and seam fold, priced by panel count and roof pitch |
| Full condition assessment | Starting at $400 | Complete panel, flashing, coating, and gutter evaluation with written remaining-life report, priced by complexity |
| Post-storm emergency check | On estimate | Targeted inspection after wind or storm events, priced by urgency and access difficulty |
| Travel | Included | in Anaheim and surrounding areas, no separate call-out or mileage fee |
| Estimate | Free | Response within 24h at (714) 422-0673, no obligation to book |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Seamless aluminum gutter, standard profile | Starting at $9/linear ft | Includes on-site forming, hangers and end caps; run length and hanger spacing move the price. |
| Half-round or profile-matched system | Starting at $14/linear ft | Includes hidden hangers that clear standing seam ribs; panel profile and color review add cost. |
| Leaf protection and cleanout package | Starting at $6/linear ft | Screens, hoods and cleanout access; heavy eucalyptus or palm debris load raises the figure. |
| Downspout and discharge routing | Starting at $12/linear ft | Sized for winter downpours; distance to discharge point and wall protection affect the total. |
| Complex or large-scale job | On estimate | Multi-story access, long commercial runs or historic profile work needs an on-site look first. |
| Estimate | Free | Response within 24 hours at (714) 422-0673, no obligation to book. |
| Service / Criteria | Indicative Rate | Details |
|---|---|---|
| Commercial roof inspection and leak diagnosis | Free estimate | On-site walk, moisture check and written findings; access and roof height move the scope. |
| Exposed-fastener ribbed panel install | Starting at $4.50 per sq ft | Panel, fasteners and trim included; tear-off volume and deck repair raise the number. |
| Standing seam commercial install | Starting at $9.00 per sq ft | Concealed fasteners and raised seam included; insulation and height drive cost up. |
| Screw replacement and re-fastening | Starting at $2.75 per sq ft | Washer and fastener replacement with lap reseal; rust severity changes the labor. |
| Large warehouse or multi-building scope | On estimate | Needs an on-site look at deck, purlins, access and phasing before pricing. |
| Estimate visit | Free | Response within 24h at (714) 422-0673, no obligation to book. |
Indicative rates, actual cost varies with project size, materials, and site access. Free personalized estimate within 24h.
Homeowners searching for a metal roofing contractor near me in Anaheim need a crew that understands the local building stock, not a call center three counties away. Anaheim Metal Roofing is a network of licensed, bonded, and insured local contractors who install, replace, re-roof, and repair metal roofing across Anaheim and surrounding areas, from the historic Colony bungalows near downtown to the hillside custom homes in Anaheim Hills and Canyon Rim. We work on steep mountain pitches, roofs shaded by heavy tree cover, and high-elevation exposures where sun and wind do their damage, plus a large stock of aging screw-down roofs whose fasteners are backing out.
We serve Anaheim, Fullerton, Orange, Garden Grove, Santa Ana, and the surrounding north Orange County communities. Whether you need a full Metal Roof Installation or a targeted repair, we give straight guidance on what your roof actually needs. Call (714) 422-0673 to schedule a free roof inspection.
Metal roofs leak for predictable reasons, and most of them trace back to time and thermal movement. On 15 to 30 year old exposed-fastener roofs, the number one cause is fasteners backing out as their EPDM sealing washers dry, shrink, and crack, leaving a path for water at every screw. Seams separate as panels expand and contract through hot days and cool nights. Pipe boots and flashing fail at chimneys, skylights, and valleys where sealant ages out. Santa Ana winds lift panel edges and ridges, and fallen limbs puncture panels outright.
Ignoring a small leak is expensive. Water tracks along purlins and decking far from the point of entry, so by the time you see a stain inside, the sheathing underneath may already be rotting and insulation may be soaked. That is why we start every repair call with a proper inspection rather than a tube of sealant. Our Metal Roof Leak Repair service finds the actual source, and our Screw Replacement & Re-Fastening work often restores a watertight roof for a fraction of replacement cost. When a full Metal Roof Repair is the honest answer, we say so; when replacement makes more sense, we say that too.
If you have an active leak, a lifted panel, or a roof that has been through a storm, call (714) 422-0673 or request a free estimate. We will tell you plainly whether a repair will hold or whether it is time to plan a replacement.
We install the full range of metal systems and match the system to the home, the pitch, and the budget. Standing Seam Metal Roofing is the premium choice: concealed clips, clean lines, and no exposed screws to service. Corrugated & Ribbed Panel Roofing is the economical workhorse for cabins, barns, and workshops. We also install Metal Shingle Roofing, Stone-Coated Steel Roofing, and Copper & Specialty Metal Roofing for accents and historic profiles.
The honest comparison is simple: standing seam costs more up front and has no exposed fasteners to maintain, while screw-down costs less and needs its fasteners serviced over its life. When the deck is sound, Metal Roof Over Shingles (Retrofit) is a legitimate way to save on tear-off; when it is not, a full Metal Roof Replacement is the right call.
Metal roof projects are typically quoted per square foot, while repairs are often flat-rate. What moves the number is the panel system and metal gauge, roof pitch and complexity, tear-off versus recover, decking condition, and access. We frame every figure as a typical range only, and final pricing depends on the roof and site conditions. Some carriers may offer premium discounts for metal or impact-rated roofs, but that is between you and your insurer.
For a clearer picture of how we price work, see our pricing page, then request a free estimate or a free roof inspection so we can give you real numbers for your home.
After a storm, we inspect the roof and provide written documentation with photos that you may submit to your own insurer. We are not an insurance adjuster or agent, coverage decisions rest with your carrier, and we make no promise that a claim will be approved. On permits, in most jurisdictions a permit is commonly required for a full replacement, but requirements vary by city and by the scope of work. Historic district or HOA design review can also affect panel profile and color choices.
Requirements vary, so always verify with the Anaheim building or planning department before starting your project. To schedule an inspection or ask a question, contact us.
Ready to get started? Anaheim Metal Roofing serves in Anaheim and surrounding areas. Get your free, no-obligation estimate today.
Get a Free EstimateMetal Roofing in Anaheim · Response within 24h · No commitment · ☎ (714) 422-0673
Your Free Quote Request