Serving the Anaheim area  ·  (714) 422-0673  ·  Open Mon-Sun 7am-7pm
📞 (714) 422-0673 Free Quote

Metal Roofing in Santa Ana, CA (92703) · Local Professionals

Anaheim Metal Roofing · Fast response in Santa Ana and the Anaheim area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (714) 422-0673
+343Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Santa Ana's older bungalows and dense commercial blocks take a beating from the sun, and most roofs around here are well past their prime. From the historic homes near the downtown core to the ranch tracts off Bristol and Warner, we know exactly what fails first on a Santa Ana roof.

Homeowners in 92703 call Anaheim Metal Roofing because we understand the specific wear patterns of this city: UV-baked shingles, wind-lifted edges from fall Santa Ana winds, and flashing gaps that show up after a heavy winter storm. We are based just up the road in Anaheim, and we treat Santa Ana properties like our own neighborhood.

Metal Roofing in Santa Ana (92703)

Santa Ana sits on the flat Santa Ana River plain, which means most properties here deal with tight lot lines, mature trees, and drainage that has to be managed carefully during winter storms. The housing stock is a mix of 1920s Craftsman bungalows near the historic downtown, 1950s and 60s stucco ranch homes with low-pitched composition shingle roofs, and denser commercial blocks along Main Street and Grand Avenue. Many of these roofs were not designed for the relentless inland heat, and we see a lot of cracked shingles, dried-out sealant, and rusted fasteners on older metal panels.

Our team has worked throughout Santa Ana and the surrounding Anaheim area for years. We know how to navigate the narrow driveways and alley access common in the Lacy and French Park neighborhoods, and we understand the permit process through the city's building department. Whether it is a small repair on a bungalow near the Bowers Museum or a full standing seam installation on a commercial building near the 55 freeway, we bring the right tools and experience for the job.

Our services in Santa Ana

How a Job Works in Santa Ana

Step 1: You call us at (714) 422-0673 or request a free estimate online. We schedule an on-site assessment at your Santa Ana property, usually within a day or two. We inspect the roof, check the attic if accessible, and look for signs of leaks, wind damage, or failed flashing. You get a written estimate with clear pricing before any work begins.

Step 2: Once you approve the estimate, we pull the necessary permits from the city of Santa Ana and schedule the work. For tight lots in older neighborhoods, we plan material delivery and staging carefully to avoid blocking neighbors' driveways or alleys. If your home is in a historic district or HOA, we coordinate any required design review and make sure the panel profile and color meet the rules. Our crews are fully insured and trained to handle everything from a simple repair to a full replacement.

Step 3: After the work is done, we walk the property with you, clean up all debris, and make sure you are satisfied. We use magnets to pick up stray screws and nails, and we haul away old roofing materials. We leave your yard and driveway as clean as we found them, and we do a final inspection to confirm the roof is watertight and secure.

Pricing in Santa Ana depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. For a typical 1,500 square foot home, metal roof installation starts around $8 per square foot, so you are looking at roughly $12,000 for a basic corrugated panel roof. Standing seam runs about $10 per square foot, and a full replacement with metal shingles or stone-coated steel starts around $9 per square foot. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind that local code limits how many layers you can have. Repairs start at $450 for minor leak fixes, and screw replacement or re-fastening starts at $750. We always provide a free estimate so you know exactly what to expect before we start. Call (714) 422-0673 to schedule yours.

My Santa Ana bungalow near the downtown historic district has original 1920s shingles. Can I install a metal roof over them?
Probably not directly. Santa Ana follows the California Building Code, which limits re-roofing over existing shingles to two layers in most cases. If your roof already has two layers, we have to tear off the old shingles first. We will check the number of layers during our free inspection and let you know exactly what is required. For historic homes, we also check if the neighborhood has design review rules that affect the panel style.
A Santa Ana windstorm just lifted some panels on my commercial building near the 55 freeway. How fast can you respond?
We prioritize storm damage calls and can usually get a crew out to your Santa Ana property within 24 to 48 hours for an emergency inspection. Call us at (714) 422-0673 and we will schedule a visit to secure the roof and prevent further water damage. We handle insurance documentation as a service, but we never promise coverage or suggest that a deductible can be waived.
What is the typical cost to repair a leak on a metal roof in Santa Ana?
Most minor leak repairs start at $450, which covers diagnosing the source and sealing or replacing the failed component. If the leak is caused by multiple issues, like separated seams and rusted fasteners, the cost can go up. We give you a firm quote after inspecting the roof, so there are no surprises. Factors include roof height, access, and whether the leak is around a chimney or skylight.
Do I need a permit to replace my roof in Santa Ana, and how long does it take?
Yes, a roofing permit is generally required for a full replacement or re-roof in Santa Ana. The exact requirements and fees vary, so we always verify with the city's building department before starting. Permit approval can take a few days to a couple of weeks depending on the workload. We handle the paperwork and inspections for you, so you do not have to deal with the city yourself.
My neighbor's tree branches hang over my roof in Santa Ana, and I am worried about damage. What are my options?
In California, you have the right to trim branches that cross your property line, but you should first check with your neighbor and any local ordinances. For roof damage caused by overhanging branches, we can inspect and repair any punctures or lifted panels. If you are in an HOA, review the rules about tree maintenance and property lines. We can provide a report for your HOA or insurance if needed.
Are you insured for work on my Santa Ana property?
Yes, we are fully insured with both general liability and workers' compensation coverage. That means if anything goes wrong on your property, you are protected.
What should I do to maintain my metal roof in Santa Ana between seasons?
In Santa Ana, the main threats are UV damage and wind. We recommend an annual inspection, especially after the fall Santa Ana winds, to check for loose fasteners and lifted panels. Clean out gutters and downspouts before the winter rains to prevent water backup. Also, trim any tree branches that could scrape or puncture the roof. A simple coating every few years can extend the life of the finish and reflect heat.

Nearby service areas

📍 Anaheim 92808📍 Fullerton 92832📍 Orange 92868📍 Garden Grove 92844
Why choose us?

Trusted professionals in Anaheim

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Anaheim

All your work handled by qualified professionals in Anaheim

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

343+ Verified Client Reviews in Anaheim

⭐⭐⭐⭐⭐ 4.9/5 · 343 verified Google reviews

Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Yorba Linda

“We needed a metal roof on our equipment hangar out in the rural part of the county and these guys handled the whole thing. The crew of four knocked out the corrugated panels in about three days and cleaned up every last screw and scrap piece before they left. Way sturdier than the old setup we had.”

Commercial Metal Roofing
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Fullerton

“Had them do a metal roof over our existing shingles on the back porch and patio cover area. I was worried about the transition but they flashed it perfectly and it's bone dry through the last few storms.”

Metal Roof Over Shingles (Retrofit)
David L.
⭐⭐⭐⭐⭐
DL
David L.
Orange

“Called them out because I was worried about debris piling up around our metal building. They did a full inspection of the panels and fasteners, cleared the problem areas, and gave me an honest report instead of trying to upsell me a whole replacement. Appreciated the straight talk.”

Metal Roof Inspection
Karen T.
⭐⭐⭐⭐
KT
Karen T.
Garden Grove

“Our old metal roof on the house was rusting through in spots and they tore it off and replaced it with a new standing seam system. Two weeks start to finish, and the difference is night and day. Only reason it's not five stars is they left a small pile of old fasteners in the side yard the first day, but they cleaned it up once I mentioned it.”

Metal Roof Replacement
Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Santa Ana

“Our skylight started leaking right where it meets the metal roof and these folks tracked it down fast. They redid the flashing and sealed it up, and the drip that had been staining our ceiling for months is completely gone. Relieved is an understatement.”

Skylight Repair
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Placentia

“We went with standing seam on our house and the install crew was seriously impressive, six guys, super organized, and the panels line up perfectly across the whole roof. They finished ahead of schedule and the curb appeal is unreal. Neighbors keep asking who did it.”

Standing Seam Metal Roofing
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Brea

“Straightforward metal roof install on our place and they nailed it. Fair price, showed up when they said they would, and the corrugated panels look great.”

Metal Roof Installation
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Anaheim

“We wanted the look of tile without the weight and cracking, so they set us up with stone-coated steel. Honestly it's hard to tell it's not real tile from the street, and the crew was careful with our landscaping the whole time. Took about a week and a half for the whole house. Would use them again in a heartbeat.”

Stone-Coated Steel Roofing
Free Quote

Get Your Free Quote

Metal Roofing in Anaheim · Response within 24h · No commitment · ☎ (714) 422-0673

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Anaheim ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm