Serving the Anaheim area  ·  (714) 422-0673  ·  Open Mon-Sun 7am-7pm
📞 (714) 422-0673 Free Quote

Metal Roofing in Irvine, CA (92604) · Local Professionals

Anaheim Metal Roofing · Fast response in Irvine and the Anaheim area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+343Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Irvine's planned villages are easy to spot from the street: stucco walls, concrete tile roofs, and uniform setbacks that hide a very real problem. That tile cracks under relentless sun and UV, and when it does, water finds the underlayment fast. We are Anaheim Metal Roofing, and we work Irvine's tile tracts and custom hillside homes every week.

Homeowners in 92604 call us because we know the difference between a cosmetic tile repair and a failing roof system. Whether you are near William R. Mason Regional Park or in a newer village off Culver Drive, we can tell you what your roof actually needs. We are fully insured, and we start with a free on-site assessment.

Metal Roofing in Irvine (92604)

Irvine sits on the flat Santa Ana River plain, then climbs into the foothills toward the Santa Ana Mountains. That means two very different roof jobs in one city. In the flatland villages, lots are tight and roofs are usually concrete tile over wood framing, often with low slopes and complex hips and valleys. Access can be tricky for a full tear-off, and HOA design review is common. In the hillside communities, wind exposure is higher, and embers from wildfire can drift in during Santa Ana wind events. We plan staging and safety around those grades, and we pay attention to flashing details at chimneys, skylights, and wall intersections, because that is where leaks start here.

Our team has installed standing seam, stone-coated steel, and metal shingle roofs across Irvine and the surrounding Anaheim area. We also handle leak repair and re-fastening on existing metal roofs, which is often the smarter call than a full replacement when the panels are still sound.

Our services in Irvine

How a Job Works in Irvine

Step 1: You call (714) 422-0673 or request a free estimate. We schedule an on-site assessment, inspect the roof and attic if accessible, and talk through what we find. You get a written scope with pricing, not a pressure pitch. If your home is in an HOA, we can note the submittal requirements early so the approval does not stall the job.

Step 2: We pull the roofing permit through the City of Irvine building department, confirm the scope, and schedule the crew. On tight-lot streets, we plan material delivery and dumpster placement so neighbors are not blocked. We protect landscaping and walkways, and we keep the site secure each evening. Most residential metal roof installations take several days depending on size and complexity.

Step 3: Cleanup is part of the job. We magnet-sweep for nails, haul away debris, and walk the property with you. We show you the finished roof, explain the warranty, and make sure you know who to call if anything comes up later.

Pricing in Irvine depends on roof size, pitch, access, and how much tear-off and deck repair is needed. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and metal roof over shingles (retrofit) at $7. Stone-coated steel and metal shingle roofing start at $9 per square foot. Repairs start at $450, screw replacement and re-fastening at $750, and flashing, chimney, or skylight repair at $600. Coating and painting starts at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. Urgency matters too, since an active leak repair is priced differently than a planned replacement. Call (714) 422-0673 for a free, no-obligation estimate.

My concrete tile roof in a village near Culver Drive is cracking. Can you install stone-coated steel over it?
In many cases yes, but it depends on the condition of the existing tile and underlayment, the roof slope, and local code limits on layers. We inspect first, then recommend either a retrofit with stone-coated steel or a full tear-off if the deck or underlayment is compromised. We handle the details so the new roof performs.
A Santa Ana wind event peeled back panels on my metal roof. How fast can you respond in Irvine?
Call (714) 422-0673 and we will schedule an inspection as soon as possible. We secure the area, document the damage for your insurance claim, and make temporary repairs if needed before permanent work. We cannot promise coverage, but we can give you the documentation your insurer will ask for.
What does a typical metal roof replacement cost in Irvine?
Most Irvine replacements fall in a range based on square footage and complexity. Our published starting rates are $9 per square foot for replacement and $10 for standing seam, but tear-off, deck repair, and HOA-required colors can affect the final number. We give you a written estimate after seeing the roof.
Do I need a permit for a metal roof in Irvine?
A full replacement or re-roof commonly requires a permit, and the City of Irvine building department sets the thresholds and inspection requirements. We verify the current rules before work starts and handle the permit process for you. Rules can change, so we always confirm with the city.
My HOA requires a specific roof color. Can you help with approval?
Yes. Irvine HOAs often have design review requirements for panel profile and color. We can provide product specifications and color samples for your submittal, and we coordinate the installation schedule around the approval. We also respect property line setbacks and neighbor concerns during staging.
Are you insured for work on my Irvine property?
Yes. We carry general liability insurance and workers' compensation coverage. We are happy to provide proof of insurance before work begins so you have peace of mind.
How should I maintain a metal roof in Irvine's climate?
Irvine's sun and dust are hard on roofs. We recommend an annual inspection, especially before the winter rains, to check fasteners, sealant at flashing, and debris in valleys and gutters. Catching a loose fastener or cracked seal early prevents a leak. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Anaheim

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Anaheim

All your work handled by qualified professionals in Anaheim

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

343+ Verified Client Reviews in Anaheim

⭐⭐⭐⭐⭐ 4.9/5 · 343 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Anaheim · Response within 24h · No commitment · ☎ (714) 422-0673

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Anaheim ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm