Serving the Anaheim area  ·  (714) 422-0673  ·  Open Mon-Sun 7am-7pm
📞 (714) 422-0673 Free Quote

Metal Roofing in Placentia, CA (92870) · Local Professionals

Anaheim Metal Roofing · Fast response in Placentia and the Anaheim area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
🎯 Get a Free Quote 📞 (714) 422-0673
+343Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Placentia is a city of tight-knit neighborhoods where 1960s ranch homes sit on quiet cul-de-sacs off Yorba Linda Boulevard, and the hillside edges near Tri-City Park back up to dry canyon brush. The housing stock here is mostly stucco and wood-frame with low-pitched composition shingle roofs, and those roofs take a beating from relentless sun and fall Santa Ana winds.

Homeowners in Placentia (92870) call Anaheim Metal Roofing because we know the specific problems these roofs face, from UV-baked shingles that crack and curl to wind-lifted panels after a gusty October night. We are based just down the road in Anaheim and have been working on Placentia roofs for years, including the older tracts near the Placentia Civic Center and the custom homes up against the canyon edges.

Metal Roofing in Placentia (92870)

Placentia sits on the flat Santa Ana River plain, but the northern and eastern edges climb into the dry chaparral foothills of the Santa Ana Mountains. That means two different roof environments in one city. In the flatlands, 1950s and 60s ranch homes often have low-slope roofs with limited attic ventilation, and the summer heat bakes shingles until they crack. In the hillside areas, homes face ember drift from canyon fires and gusty Santa Ana winds that can peel back flashing and lift panel edges. Many properties have mature eucalyptus and palm trees that drop debris and create shade that traps moisture, leading to failed fasteners and separated seams. Our team has worked on roofs throughout Placentia, from the neighborhoods around Kraemer Boulevard to the streets near the Placentia Metrolink station, and we understand how to handle the tight lot access and varied roof pitches you find here.

We bring fully insured crews (general liability and workers' compensation) and a focus on metal roofing systems that reflect heat and resist wind uplift. Whether you need a full replacement or a repair on a standing seam roof, we know the local building department requirements and can help you navigate them.

Our services in Placentia

How a Job Works in Placentia

Step 1: You call us at (714) 422-0673 or request a free estimate online. We schedule an on-site assessment at your Placentia property, where we inspect your existing roof, check for leaks, damaged flashing, and loose fasteners, and discuss your options. We provide a written estimate with clear pricing and no pressure.

Step 2: Once you approve, we pull the necessary permits from the City of Placentia and schedule the work. On tight lots with limited driveway access, we plan material delivery carefully to avoid blocking neighbors. If your home is in an HOA, we can coordinate with them on color and profile approvals. Our crew arrives on time, protects your landscaping, and works efficiently to minimize disruption.

Step 3: After the job is complete, we do a thorough cleanup, haul away all debris, and walk the property with you to ensure everything meets your satisfaction. We leave your yard clean and your new roof ready to protect your home for decades.

Pricing for metal roofing in Placentia depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10 per square foot, and metal roof replacement at $9 per square foot. If you are retrofitting over existing shingles, metal roof over shingles starts at $7 per square foot. Repairs, including leak repair, start at $450, and screw replacement or re-fastening starts at $750. Stone-coated steel roofing, popular in Placentia for its ability to mimic tile or shake while resisting embers, starts at $9 per square foot. We also offer free inspections and estimates for storm damage. Call us at (714) 422-0673 to get a precise quote for your Placentia home.

My Placentia home was built in the 1960s and has the original composition shingle roof. Is it a good candidate for a metal roof over shingles?
Many Placentia ranch homes from that era have roof structures that can support a retrofit, but it depends on the condition of the shingles and the framing. We inspect the existing layers and check local code limits on recover. If the shingles are failing or there are already multiple layers, a full tear-off and replacement is usually the better long-term choice. We will give you a straight answer after a free inspection.
A Santa Ana wind storm just lifted some panels on my metal roof near Tri-City Park. Can you come out quickly?
Yes. Wind damage is one of our specialties, and we offer free inspections for storm damage. Call us at (714) 422-0673 and we will schedule a prompt visit to secure the roof and prevent further water intrusion. We can often make temporary repairs the same day and provide a permanent fix estimate.
What does a typical metal roof repair cost in Placentia?
Most repairs start at $450 for leak diagnosis and fixing flashing or fasteners. Screw replacement and re-fastening start at $750. The final cost depends on the extent of damage, roof access, and whether the repair is isolated or part of a larger issue. We provide a free estimate so you know the price before we start.
Do I need a permit to replace my roof in Placentia, and can you help with that?
Yes, the City of Placentia typically requires a permit for a full roof replacement or re-roof. Requirements and fees can vary, so we always verify with the local building department. We handle the permit application and inspections as part of our service, so you do not have to worry about the paperwork.
My HOA has strict rules about roof colors. Can you help me get approval for a metal roof?
We work with HOAs in Placentia regularly. We can provide color samples and product specifications to submit for approval, and we will coordinate with your HOA to ensure the chosen panel profile and color meet their guidelines. Just let us know you are in an HOA and we will guide you through the process.
Are you fully insured for work on my Placentia property?
Yes, we carry general liability insurance and workers' compensation coverage.
What maintenance does a metal roof need in Placentia's climate?
In Placentia, metal roofs benefit from annual inspections to check for loose fasteners, debris buildup (especially from eucalyptus and palm trees), and any signs of flashing wear. We recommend a professional inspection each fall before the rainy season and after any major wind event. Regular maintenance can extend the life of your roof and prevent costly leaks.

Nearby service areas

📍 Anaheim 92808📍 Fullerton 92832📍 Orange 92868📍 Garden Grove 92844
Why choose us?

Trusted professionals in Anaheim

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Anaheim

All your work handled by qualified professionals in Anaheim

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

343+ Verified Client Reviews in Anaheim

⭐⭐⭐⭐⭐ 4.9/5 · 343 verified Google reviews

Chris A.
⭐⭐⭐⭐⭐
CA
Chris A.
Yorba Linda

“We needed a metal roof on our equipment hangar out in the rural part of the county and these guys handled the whole thing. The crew of four knocked out the corrugated panels in about three days and cleaned up every last screw and scrap piece before they left. Way sturdier than the old setup we had.”

Commercial Metal Roofing
Scott H.
⭐⭐⭐⭐⭐
SH
Scott H.
Fullerton

“Had them do a metal roof over our existing shingles on the back porch and patio cover area. I was worried about the transition but they flashed it perfectly and it's bone dry through the last few storms.”

Metal Roof Over Shingles (Retrofit)
David L.
⭐⭐⭐⭐⭐
DL
David L.
Orange

“Called them out because I was worried about debris piling up around our metal building. They did a full inspection of the panels and fasteners, cleared the problem areas, and gave me an honest report instead of trying to upsell me a whole replacement. Appreciated the straight talk.”

Metal Roof Inspection
Karen T.
⭐⭐⭐⭐
KT
Karen T.
Garden Grove

“Our old metal roof on the house was rusting through in spots and they tore it off and replaced it with a new standing seam system. Two weeks start to finish, and the difference is night and day. Only reason it's not five stars is they left a small pile of old fasteners in the side yard the first day, but they cleaned it up once I mentioned it.”

Metal Roof Replacement
Sarah W.
⭐⭐⭐⭐⭐
SW
Sarah W.
Santa Ana

“Our skylight started leaking right where it meets the metal roof and these folks tracked it down fast. They redid the flashing and sealed it up, and the drip that had been staining our ceiling for months is completely gone. Relieved is an understatement.”

Skylight Repair
Rachel S.
⭐⭐⭐⭐⭐
RS
Rachel S.
Placentia

“We went with standing seam on our house and the install crew was seriously impressive, six guys, super organized, and the panels line up perfectly across the whole roof. They finished ahead of schedule and the curb appeal is unreal. Neighbors keep asking who did it.”

Standing Seam Metal Roofing
Kevin R.
⭐⭐⭐⭐⭐
KR
Kevin R.
Brea

“Straightforward metal roof install on our place and they nailed it. Fair price, showed up when they said they would, and the corrugated panels look great.”

Metal Roof Installation
Emily C.
⭐⭐⭐⭐⭐
EC
Emily C.
Anaheim

“We wanted the look of tile without the weight and cracking, so they set us up with stone-coated steel. Honestly it's hard to tell it's not real tile from the street, and the crew was careful with our landscaping the whole time. Took about a week and a half for the whole house. Would use them again in a heartbeat.”

Stone-Coated Steel Roofing
Free Quote

Get Your Free Quote

Metal Roofing in Anaheim · Response within 24h · No commitment · ☎ (714) 422-0673

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Anaheim ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm