Serving the Anaheim area  ·  (714) 422-0673  ·  Open Mon-Sun 7am-7pm
📞 (714) 422-0673 Free Quote

Metal Roofing in Orange, CA (92868) · Local Professionals

Anaheim Metal Roofing · Fast response in Orange and the Anaheim area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+343Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Orange is a city of contrasts: vintage cottages around the Plaza, mid-century ranch homes on wide lots, and newer hillside builds near Santiago Canyon. The roofs here take a beating from sun, wind, and the occasional heavy rain, and many are original or nearing the end of their service life.

Homeowners in Orange (92868) call Anaheim Metal Roofing because we understand the local housing stock and the specific challenges of roofing here. From the historic Old Towne district to the tracts off Chapman Avenue, we provide metal roofing solutions that last.

Metal Roofing in Orange (92868)

Orange's terrain ranges from flat valley floors to gently sloping foothills, and the roofing challenges vary accordingly. In older neighborhoods like Old Towne, you'll find 1920s bungalows with steep gables and intricate flashing details, while mid-century homes often have low-slope roofs that require careful panel selection. The soil here is mostly clay and loam, which can shift with moisture and affect roof stability over time. We also deal with mature trees, like the eucalyptus and oak that drop debris and create shade, leading to moss and algae growth. Our team is experienced in navigating these conditions and choosing the right metal roofing system for each property.

We've worked on homes near Hart Park, the Orange Circle, and throughout the 92868 ZIP code, so we know the local building department's requirements and common HOA guidelines.

Our services in Orange

How a Job Works in Orange

Step 1: We start with a free on-site assessment. You call us at (714) 422-0673, and we schedule a visit to inspect your roof, discuss your needs, and provide a detailed estimate. We'll also check for any signs of damage or wear that might not be obvious.

Step 2: Once you approve the estimate, we handle the permitting process with the City of Orange and coordinate with your HOA if needed. Our crew arrives on time, protects your landscaping, and works efficiently to minimize disruption. For homes with tight lot access, we use specialized equipment to move materials safely.

Step 3: After installation, we clean the site thoroughly, walk you through the finished work, and make sure you're satisfied. We leave your property clean and your new roof ready to protect your home for decades.

Metal roofing costs in Orange vary based on the type of system, roof size, and complexity. For a typical 1,500-square-foot home, metal roof installation starts around $8 per square foot, while standing seam runs about $10 per square foot. If you're replacing an existing roof, expect starting prices from $9 per square foot, and retrofitting over shingles starts at $7 per square foot. Repairs, like leak fixes, start at $450, and screw replacement begins at $750. Factors like roof pitch, number of stories, and accessibility can affect the final price. We offer free estimates, so call (714) 422-0673 to get a quote tailored to your home.

My Old Towne cottage has a steep roof and ornate flashing. Can you match the historic look with metal?
Yes. We specialize in standing seam and metal shingle profiles that mimic traditional materials while providing modern durability. We pay close attention to flashing details around chimneys and dormers to maintain the historic character of your home.
A storm just blew through Orange and lifted some panels on my roof. How quickly can you respond?
We offer emergency storm damage repair and free inspections. Call us at (714) 422-0673, and we'll schedule a prompt visit to secure your roof and prevent further damage.
What's the typical cost for a metal roof on a 1950s ranch home in Orange?
For a 1,500-square-foot ranch, installation starts around $8 per square foot, but factors like roof complexity and material choice can increase the price. We provide free estimates to give you an accurate figure.
Do I need a permit to replace my roof in Orange, and how do I get one?
Yes, roofing permits are required for replacements. We handle the permitting process for you and ensure all work meets local codes. You can also verify details on the City of Orange website at https://www.cityoforange.org/.
My HOA has strict design rules. Can you help with approval for a metal roof?
We have experience working with HOAs in Orange and can provide material samples and specifications to help you get approval. We'll coordinate with your HOA to ensure the chosen roof meets their guidelines.
Are you fully insured for roofing work in Orange?
Yes, we carry general liability and workers' compensation insurance to protect your property and our crew. We're happy to provide proof of insurance upon request.
What maintenance does a metal roof need in Orange's climate?
Metal roofs are low-maintenance, but we recommend annual inspections to check for loose fasteners and debris buildup, especially after Santa Ana winds. Cleaning gutters and trimming overhanging trees can also prolong the roof's life.
Why choose us?

Trusted professionals in Anaheim

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Anaheim

All your work handled by qualified professionals in Anaheim

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

343+ Verified Client Reviews in Anaheim

⭐⭐⭐⭐⭐ 4.9/5 · 343 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Anaheim · Response within 24h · No commitment · ☎ (714) 422-0673

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Anaheim ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm