Serving the Anaheim area  ·  (714) 422-0673  ·  Open Mon-Sun 7am-7pm
📞 (714) 422-0673 Free Quote

Metal Roofing in Anaheim, CA (92808) · Local Professionals

Anaheim Metal Roofing · Fast response in Anaheim and the Anaheim area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+343Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Anaheim is a city of layers, from the 1920s Colony bungalows near downtown to the 1980s hillside custom homes up in Anaheim Hills, and every one of those roofs faces the same relentless sun, Santa Ana winds, and wildfire embers.

We are Anaheim Metal Roofing, based right here, and we know the housing stock from the flat Santa Ana River plain up into the chaparral foothills. Whether you are in a stucco ranch off Lincoln Avenue or a two-story tile-roofed home near Canyon Rim, we have seen how the local weather wears roofs down and we are here to fix it.

Metal Roofing in Anaheim (92808)

Anaheim's terrain and building styles create specific roofing challenges. On the flat basin floor, 1950s and 60s ranch tracts often have low-pitched roofs where heat builds up and shingles crack under the UV. In the historic Colony, Craftsman bungalows have tight lots and mature trees, so access can be tricky and flashing details around chimneys and dormers need careful attention. Up in Anaheim Hills and Canyon Rim, homes sit on slopes with dry chaparral and oak, and the Santa Ana winds can lift panel edges and drive embers into roof vents. The marine layer may bring morning dampness that finds failed flashing, and short heavy winter storms test every seam. We understand how the hillside grade, the tight access in older neighborhoods, and the intense sun all affect a metal roof installation or repair.

Our team has worked on roofs across Anaheim, from the Platinum Triangle condos to the commercial buildings in Anaheim Canyon. We know the local suppliers, the inspection quirks, and the way the afternoon sun hits a west-facing roof. When we install a standing seam or stone-coated steel roof, we build it to handle the heat, wind, and ember exposure that come with living here.

Our services in Anaheim

How a Job Works in Anaheim

Step 1: You call us at (714) 422-0673 or request a free estimate online. We schedule an on-site assessment at your Anaheim property, where we inspect the roof, check the attic if accessible, and discuss your options. We will explain what we find, whether it is a repair or a full replacement, and give you a written estimate.

Step 2: Once you approve, we handle the work. In older neighborhoods like the Colony, we plan for tight access and protect landscaping. If your home is in an HOA or historic district, we help you understand the design review requirements and coordinate as needed. We pull the necessary permits from the City of Anaheim and schedule inspections. Our crews are fully insured and trained to work safely on steep pitches and hillside properties.

Step 3: After installation, we clean up thoroughly, haul away all debris, and walk the property with you to make sure you are satisfied. We do not leave until your yard, driveway, and gutters are clear of nails and scraps. We also provide documentation for your records and any warranty information.

Pricing for metal roofing in Anaheim depends on the size and complexity of your roof, the material you choose, and the condition of the existing structure. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, and metal roof replacement at $9. If you are retrofitting over existing shingles, that starts at $7 per square foot, but keep in mind local code limits how many layers you can recover. Repairs start at $450, and screw replacement or re-fastening starts at $750. Stone-coated steel and metal shingle roofing both start at $9 per square foot. For a precise estimate tailored to your Anaheim home, call us at (714) 422-0673. We will give you a clear, no-pressure quote.

My 1950s ranch in West Anaheim has a low-pitch roof. Can metal roofing work on it?
Yes, metal roofing is actually a great option for low-pitch roofs. We often recommend standing seam or corrugated panels with concealed fasteners or proper sealing for low slopes. We will assess your roof's pitch and condition during our free inspection and recommend the best system to prevent leaks.
A Santa Ana windstorm just lifted some panels on my roof in Anaheim Hills. How fast can you respond?
We prioritize storm damage calls. Call us at (714) 422-0673 and we will schedule an inspection as soon as possible, often within 24 to 48 hours. We can secure the roof temporarily if needed and provide a detailed repair estimate.
What does a typical metal roof repair cost in Anaheim?
Most repairs start at $450, but the final cost depends on the extent of damage, access, and materials. For example, a simple leak repair might be on the lower end, while replacing multiple panels or fixing flashing around a chimney could be more. We give you a firm quote after inspecting the roof.
Do I need a permit to replace my roof in Anaheim?
Yes, a roofing permit is typically required for a full replacement or re-roof. The rules and fees vary, so it is best to check with the City of Anaheim website for current requirements. We handle the permit application and inspections for you as part of our service.
My HOA requires approval for roof color. Can you help with that?
Absolutely. We work with many HOAs in Anaheim and can provide color samples, product specifications, and any documentation your HOA needs for approval. We will coordinate with your HOA to ensure the chosen metal roofing meets their design guidelines.
Are you fully insured for roofing work in Anaheim?
Yes, we are fully insured with both general liability and workers' compensation coverage.
What maintenance does a metal roof need in Anaheim's climate?
Metal roofs are low maintenance, but in Anaheim's sun and wind, we recommend an annual inspection to check fasteners, seals, and flashing. Cleaning gutters and removing debris, especially after Santa Ana winds, helps prevent issues. We offer maintenance plans and can advise you on the best schedule.
Why choose us?

Trusted professionals in Anaheim

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Anaheim

All your work handled by qualified professionals in Anaheim

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

343+ Verified Client Reviews in Anaheim

⭐⭐⭐⭐⭐ 4.9/5 · 343 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Anaheim · Response within 24h · No commitment · ☎ (714) 422-0673

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Anaheim ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm