Serving the Anaheim area  ·  (714) 422-0673  ·  Open Mon-Sun 7am-7pm
📞 (714) 422-0673 Free Quote

Metal Roofing in Garden Grove, CA (92844) · Local Professionals

Anaheim Metal Roofing · Fast response in Garden Grove and the Anaheim area · Free estimate 24h

✅ Licensed Contractor 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+343Verified Reviews
10Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured

Garden Grove is a city of mid-century ranch tracts, and that shows on the roof. Most of the homes around here went up in the 1950s and 1960s with low-pitch roofs covered in composition shingle or flat concrete tile, and after sixty years of Orange County sun, those roofs are tired. The lots are wide and the streets are lined with palms and citrus, and you can see the same worn edges and cracked tiles block after block, especially in the neighborhoods off Brookhurst and around Garden Grove Park.

Homeowners in 92844 call us because we know exactly what the sun and the Santa Ana winds do to these roofs. We have replaced and repaired hundreds of them across Garden Grove, from the ranches near the historic Main Street district to the two-story stucco homes closer to the 22 freeway. When your shingles start curling or your tiles start lifting, we can tell you whether a retrofit or a full replacement makes more sense.

Metal Roofing in Garden Grove (92844)

Garden Grove sits on flat ground, but that does not make roofing simple. The older ranch tracts often have low-slope roofs that were built for shingle or tile, and when you switch to metal, the underlayment and ventilation need to be right or you will trap heat and moisture. The wide lots mean we usually have room to stage materials, but the narrow driveways and mature landscaping in neighborhoods like Garden Grove Park can make access tight. We plan each job around the actual site, not a template. The sun here is relentless, and UV damage is the main reason shingles crack and tile underlayment fails. Metal reflects that heat and lasts, which is why more homeowners in Garden Grove are making the switch.

Our team has been working in and around Anaheim for years, and Garden Grove is part of our regular service area. We know the local building department, the inspection timelines, and the common issues that come up with older homes here. Whether you need a full standing seam installation or a metal roof over your existing shingles, we handle it with our own insured crews.

Our services in Garden Grove

How a Job Works in Garden Grove

Step 1: You call us at (714) 422-0673 or request a free estimate online. We schedule an on-site assessment at your Garden Grove property, usually within a couple of days. We inspect the roof, check the attic if accessible, and talk with you about what you want. You get a written estimate with clear pricing and options, no pressure.

Step 2: Once you approve, we pull the permits (a roofing permit is typically required for a full replacement in Garden Grove) and schedule the work. On the day of installation, our crew arrives early, protects your landscaping, and gets to work. For retrofits over existing shingles, we verify the number of layers meets code. If your home is in an HOA, we coordinate the approval process with you so there are no surprises.

Step 3: When the job is done, we clean up thoroughly. We magnet-sweep the yard and driveway for nails, haul away all debris, and walk the finished roof with you. We do not leave until you are satisfied and understand the care of your new metal roof.

Pricing for metal roofing in Garden Grove depends on the size and pitch of your roof, the material you choose, and how much prep work is needed. As a ballpark, metal roof installation starts at $8 per square foot, standing seam at $10, metal roof replacement at $9, and a retrofit over existing shingles at $7. If you only need repairs, metal roof repair and leak repair start at $450, screw replacement and re-fastening at $750, and flashing or skylight repair at $600. Coating and painting start at $2.50 per square foot, and gutters for metal roofs start at $9 per linear foot. These are starting prices, and we give you a firm quote after we see your roof. Call (714) 422-0673 for a free estimate.

My 1960s ranch home near Garden Grove Park has flat concrete tile. Can you install metal over it?
In many cases, yes. A metal roof over existing shingles or tile is a common retrofit, but it depends on the condition of the deck and the number of existing layers. We inspect the roof first and let you know if a retrofit is allowed by code. If not, we can do a full tear-off and replacement.
A storm just blew some panels loose on my roof near the 22 freeway. How fast can you get out?
We offer storm and wind damage repair with a free inspection. Call us at (714) 422-0673, and we will schedule an assessment as soon as possible, often the same day or next. We can secure the roof to prevent further damage and provide a repair estimate.
What does a typical metal roof replacement cost for a 1,500 square foot home in Garden Grove?
For a home that size, a basic metal roof replacement might start around $9 per square foot, so roughly $13,500 for the roofing area, but the final price depends on pitch, access, and material. We give you an exact quote after inspecting your roof.
Do I need a permit for a metal roof in Garden Grove, and how long does it take?
Yes, a building permit is typically required for a full replacement or re-roof in Garden Grove. The exact requirements and fees are set by the city, so we always confirm with the building department before starting. Permit approval can take a few days to a couple of weeks, and we handle the paperwork for you.
My HOA has design rules. Can you help with approval for a metal roof?
We can provide product specifications, color samples, and installation details for your HOA submittal. We recommend getting approval before work begins. We are also careful about property lines and setbacks, and we can review your plot plan to ensure the new roof does not encroach on a neighbor's property.
Are you fully insured for roofing work in Garden Grove?
Yes, we carry general liability insurance and workers' compensation coverage for all our crews. This protects you and your property while we are on the job.
How often should I have my metal roof inspected in Garden Grove?
We recommend an inspection every two to three years, and after any major windstorm. The intense sun and Santa Ana winds can loosen fasteners and dry out sealants over time. A quick inspection can catch small issues before they become leaks. We offer free estimates for inspections.
Why choose us?

Trusted professionals in Anaheim

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Anaheim

All your work handled by qualified professionals in Anaheim

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

343+ Verified Client Reviews in Anaheim

⭐⭐⭐⭐⭐ 4.9/5 · 343 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Anaheim · Response within 24h · No commitment · ☎ (714) 422-0673

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Anaheim ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm